| Field | Value |
|---|
| Router Model | Buffalo AirStation WZR-1750DHP |
| Brand | Buffalo |
| Default IP Address | 192.168.11.1 |
| Login URL | http://192.168.11.1 |
| Default Username | admin |
| Default Password | password |
| Wireless Standard | 802.11ac (Wi-Fi 5) |
| Frequency Bands | Dual-band 2.4GHz + 5GHz |
Quick Answer: To log in to the Buffalo AirStation WZR-1750DHP, open a browser and navigate to 192.168.11.1. Enter the default username "admin" and password "password". If these credentials do not work, the password may have been changed — use the reset button to restore factory defaults.
Key Facts About Buffalo AirStation WZR-1750DHP Default Login
- Default IP Address: 192.168.11.1
- Default Username: admin
- Default Password: password
- Admin panel URL: http://192.168.11.1
- Reset method: Hold reset button for 10 seconds
- Supported browsers: Chrome, Firefox, Edge, Safari
The Buffalo AirStation WZR-1750DHP is a high-performance dual-band wireless router designed to deliver fast and reliable Wi-Fi connectivity for homes and small offices. It utilizes 192.168.11.1 as its default gateway address for accessing the router's administrative interface. This guide will walk you through finding and using the default login credentials for the Buffalo AirStation WZR-1750DHP, essential for initial setup or troubleshooting network issues. Understanding these defaults is crucial for managing your router's settings and ensuring optimal network performance.
What Are the Technical Specifications of the Buffalo AirStation WZR-1750DHP?
| Specification |
Details |
| Wireless Standard |
802.11ac (Wi-Fi 5) |
| Frequency Bands |
Dual-band: 2.4 GHz and 5 GHz |
| Max Speed |
Up to 1750 Mbps (450 Mbps on 2.4 GHz + 1300 Mbps on 5 GHz) |
| Security Protocols |
WPA2-PSK (AES), WPA/WPA2 Mixed |
| Antennas |
3 external antennas |
| Ethernet Ports |
1 x Gigabit WAN port, 4 x Gigabit LAN ports |
| USB Ports |
1 x USB 2.0 port (for external storage or printer sharing) |
The Buffalo AirStation WZR-1750DHP boasts impressive technical specifications designed for modern networking demands. According to manufacturer specifications, it supports the 802.11ac wireless standard, also known as Wi-Fi 5, which enables faster data transfer rates and improved performance over older standards. This router operates on dual frequency bands, offering both 2.4 GHz and 5 GHz networks, allowing devices to connect to the band best suited for their needs, with theoretical maximum speeds of up to 1750 Mbps (450 Mbps on the 2.4 GHz band and 1300 Mbps on the 5 GHz band). For security, it employs WPA2-PSK (AES) encryption, the current industry standard for robust wireless security, along with WPA/WPA2 mixed mode for compatibility with older devices. The device features three external antennas to enhance Wi-Fi signal coverage and penetration, and it is equipped with one Gigabit WAN port and four Gigabit LAN ports for high-speed wired connections. Additionally, a USB 2.0 port is available for connecting external storage devices or printers, enabling network-wide sharing.
How Do I Log In to the Buffalo AirStation WZR-1750DHP Router Admin Panel?
To access the Buffalo AirStation WZR-1750DHP admin panel (router configuration interface), follow these steps:
- Connect to the Router: Ensure your computer or device is connected to the Buffalo AirStation WZR-1750DHP, either via Wi-Fi or an Ethernet cable.
- Open a Web Browser: Launch your preferred web browser, such as Google Chrome, Mozilla Firefox, Microsoft Edge, or Safari.
- Enter the IP Address: In the address bar of your browser, type the default IP address:
192.168.11.1 and press Enter. - Enter Credentials: You will be prompted to enter a username and password. Use the default credentials: Username:
admin and Password: password. - Access the Panel: Click the "Login" or "OK" button. If the credentials are correct, you will be taken to the router's administrative dashboard, where you can configure various network settings.
It is important to use a compatible web browser for optimal access to the admin panel. Browsers like Chrome, Firefox, Edge, and Safari are generally well-supported. If you encounter issues, clearing your browser's cache and cookies can sometimes resolve login problems.
How Do I Find the Buffalo AirStation WZR-1750DHP Login IP Address?
The most common IP address to access the Buffalo AirStation WZR-1750DHP admin panel is 192.168.11.1. If this address does not work, you can find your router's current IP address using your connected computer's command prompt or terminal. On Windows, open the Command Prompt by searching for "cmd" and then type
ipconfig and press Enter. Look for the "Default Gateway" entry under your active network connection (e.g., Wi-Fi or Ethernet); this is your router's IP address. On macOS or Linux, open the Terminal and type
ip route | grep default or
netstat -nr | grep default. The IP address listed as the default route is your router's gateway. Verifying this address ensures you are attempting to log in to the correct device, which is especially useful if the default IP has been changed. This process is a common method for finding your router IP address when the default login for the router is not working.
How Do I Reset the Buffalo AirStation WZR-1750DHP Router Password Without Logging In?
You can reset the Buffalo AirStation WZR-1750DHP to factory defaults without knowing the current password by using the hardware reset button. This action will revert all settings, including the Wi-Fi name (SSID), password, and administrative login credentials, back to their original factory states. This is an effective method to reset router password without login if you have forgotten your custom password.
- Power on the Router: Ensure the Buffalo AirStation WZR-1750DHP is powered on and connected to a power source.
- Locate the Reset Button: Find the small reset button, typically located on the back or bottom of the router. You may need a paperclip or a pointed object to press it.
- Press and Hold: Press and hold the reset button for approximately 10 seconds. The router's LEDs may flash to indicate the reset process has begun.
- Release the Button: Release the button and allow the router to reboot. This process can take a few minutes.
- Reconfigure: Once the router has fully restarted, you can access its settings using the default IP address (192.168.11.1), username (admin), and password (password).
It's important to note that resetting the router will erase all custom configurations, so you will need to set up your network again from scratch. This method is also referred to as a "hard reset" and is a reliable way to regain access to your router's administrative interface.
Why Can't I Log In to My Buffalo AirStation WZR-1750DHP Router?
There are several common reasons why you might be unable to log in to your Buffalo AirStation WZR-1750DHP router. The most frequent causes include entering the incorrect IP address, attempting to use a password that has been changed from the default, or experiencing browser-related issues like cached data. If you are using the correct IP address (typically 192.168.11.1) and the default username ("admin") and password ("password"), but still cannot log in, it is highly likely that the administrative password was changed during the initial setup or at a later time. Another possibility is that your device is not properly connected to the router's network, or a firewall on your computer is blocking access. Ensure your device is connected to the Buffalo AirStation WZR-1750DHP's Wi-Fi or via an Ethernet cable. Clearing your browser's cache and cookies can also resolve login problems by removing any outdated or conflicting data. If all else fails and you cannot recall the correct credentials, performing a factory reset of the router is the most effective solution.
How Do I Secure My Buffalo AirStation WZR-1750DHP Router After Login?
Securing your Buffalo AirStation WZR-1750DHP router after logging in is a critical step to protect your home network from unauthorized access and cyber threats. The first and most important recommendation is to change the default administrator password immediately. According to security best practices, use a strong, unique password that combines uppercase and lowercase letters, numbers, and symbols, making it difficult for attackers to guess the default router password. Enable WPA2-PSK (AES) or, if your devices support it, WPA3 encryption for your Wi-Fi network; this is significantly more secure than older WEP or WPA protocols. It's also advisable to disable remote management features unless absolutely necessary, as these allow access to your router's settings from outside your home network. Regularly check for and install firmware updates provided by Buffalo, as these often contain crucial security patches that protect against known vulnerabilities. Consider setting up a guest network for visitors, which provides them internet access without allowing them onto your main network, thereby further isolating your sensitive devices and data.
Other Common Default Credentials for Buffalo Routers
| Username | Password | Notes |
|---|
| admin | password | Most common default for Buffalo |
| admin | admin | Also common, especially on older models |
| admin | (blank) | Older models might have a blank password |
| root | admin | Less common but possible |
| root | password | Another less common combination |
What Are Common Router Login IP Addresses?
IP Address Probability Table
| Address / Domain | Usage Probability | Notes |
|---|
| 192.168.11.1 | 48% | Primary default for Buffalo routers |
| 192.168.1.1 | 47% | Second most common general default |
| 192.168.0.1 | 3% | Common for other brands |
| 192.168.1.254 | 1% | ISP configurations |
| buffalo.local | 1% | Buffalo specific hostname |
Frequently Asked Questions About Buffalo AirStation WZR-1750DHP Login
What is the default IP address for the Buffalo AirStation WZR-1750DHP?
The default IP address for the Buffalo AirStation WZR-1750DHP is 192.168.11.1. You will use this address in your web browser to access the router's login page.
What is the default username and password for the Buffalo AirStation WZR-1750DHP?
The default username for the Buffalo AirStation WZR-1750DHP is "admin," and the default password is "password." These are the credentials you'll typically use for the first login.
How do I log in to my Buffalo AirStation WZR-1750DHP if I forgot the password?
If you forgot your Buffalo AirStation WZR-1750DHP password, you must reset the router to its factory default settings using the physical reset button. This action will revert the password back to "password."
What should I do if 192.168.11.1 is not working for my Buffalo AirStation WZR-1750DHP?
If 192.168.11.1 is not working for your Buffalo AirStation WZR-1750DHP, first check your device's network connection to the router. Then, try finding the correct IP address by using the
ipconfig command in Windows Command Prompt or
ip route in macOS/Linux Terminal to discover the default gateway your device is using.
How can I change the Wi-Fi password on my Buffalo AirStation WZR-1750DHP?
To change the Wi-Fi password on your Buffalo AirStation WZR-1750DHP, log in to the admin panel using the router's IP address (192.168.11.1) and default credentials. Navigate to the Wireless or Security settings section, where you can update the Wi-Fi name (SSID) and password.
Is it safe to use the default router login for my Buffalo AirStation WZR-1750DHP?
No, it is not safe to continue using the default router login for your Buffalo AirStation WZR-1750DHP. You should always change the default administrator password immediately after logging in for the first time to prevent unauthorized access to your network settings.
What is the process to reset my Buffalo AirStation WZR-1750DHP to factory defaults?
To reset your Buffalo AirStation WZR-1750DHP to factory defaults, locate the reset button on the router, press and hold it with a paperclip for about 10 seconds while the router is powered on, and then release it. The router will reboot with its original settings.
