| Field | Value |
|---|
| Router Model | Digisol DG-HR3400 |
| Brand | Digisol |
| Default IP Address | 192.168.2.1 |
| Login URL | http://192.168.2.1 |
| Default Username | admin |
| Default Password | 1234 |
| Wireless Standard | IEEE 802.11n |
| Frequency Bands | 2.4GHz |
Quick Answer: To log in to the Digisol DG-HR3400, open a browser and navigate to 192.168.2.1. Enter the default username "admin" and password "1234". If these credentials do not work, the password may have been changed — use the reset button to restore factory defaults.
Key Facts About Digisol DG-HR3400 Default Login
- Default IP Address: 192.168.2.1
- Default Username: admin
- Default Password: 1234
- Admin panel URL: http://192.168.2.1
- Reset method: Hold reset button for 10 seconds
- Supported browsers: Chrome, Firefox, Edge, Safari
Introduction
The Digisol DG-HR3400 is a wireless broadband home router designed to provide reliable internet access and file sharing capabilities. It utilizes the IEEE 802.11n wireless standard for enhanced Wi-Fi performance and offers a compact design suitable for home use. Accessing its configuration interface is typically done via the default IP address 192.168.2.1, with standard administrator credentials. This guide will walk you through the essential steps for logging into your Digisol DG-HR3400 router and securing your network.
What Are the Technical Specifications of the Digisol DG-HR3400?
The Digisol DG-HR3400 router is built with modern wireless technology to ensure efficient network performance. Based on technical specifications, it supports the IEEE 802.11n wireless standard, which allows for data streaming at speeds up to 150 Mbps. This standard is backward compatible with IEEE 802.11b/g devices, ensuring connectivity with older wireless clients. The router operates on the 2.4GHz frequency band and features intelligent antenna technology to enhance wireless signal strength and range. For security protocols, it supports WPA-PSK or WPA2-PSK with AES encryption, which are industry-standard for protecting wireless networks. The router is equipped with a WAN port for connecting to your modem and LAN ports for wired connections, though the exact number of ports is not specified in the provided information.
Digisol DG-HR3400 Technical Specifications
| Specification | Details |
|---|
| Wireless Standard | IEEE 802.11n |
| Maximum Wireless Speed | Up to 150 Mbps |
| Frequency Band | 2.4GHz |
| Security Protocols | WPA-PSK, WPA2-PSK (AES) |
| Antenna Technology | Intelligent Antenna Technology |
| WAN Port | 1 x WAN |
| LAN Ports | (Number not specified) |
| Power Adapter Input | AC 100-240V, 50/60Hz |
| Power Adapter Output | DC 9V/500mA |
How Do I Log In to the Digisol DG-HR3400 Router Admin Panel?
To access the Digisol DG-HR3400 admin panel (router configuration interface), follow these steps:
- Connect to the Router: Ensure your computer or device is connected to the Digisol DG-HR3400, either via an Ethernet cable or Wi-Fi. For initial setup and configuration, a wired connection is recommended to prevent unexpected disconnections.
- Open a Web Browser: Launch your preferred web browser, such as Google Chrome, Mozilla Firefox, Microsoft Edge, or Safari.
- Enter the IP Address: In the address bar of your browser, type the default IP address of the router:
192.168.2.1. Press Enter. - Enter Credentials: You will be presented with a login screen. Enter the default username as
admin and the default password as 1234. - Access Admin Panel: Click the "Login" button. If the credentials are correct, you will be granted access to the Digisol DG-HR3400's administration panel.
If you encounter issues, ensure your device's IP settings are configured to obtain an IP address automatically (DHCP enabled).
How Do I Find the Digisol DG-HR3400 Login IP Address?
The default login IP address for the Digisol DG-HR3400 is 192.168.2.1. This is the address you will use to access the router's administrative interface. If you are unsure about your router's IP address, you can find it by checking the router's physical label, usually located on the bottom or back of the device. Alternatively, you can determine the IP address through your connected computer's network settings. On Windows, you can open the Command Prompt and type ipconfig. Look for the "Default Gateway" entry under your active network connection. On macOS or Linux, open the Terminal and type ip route | grep default or check network preferences. While 192.168.2.1 is the most common for this model, other Digisol routers might use 192.168.1.1, so it's worth trying that if 192.168.2.1 does not work.
How Do I Reset the Digisol DG-HR3400 Router Password Without Logging In?
You can reset the Digisol DG-HR3400 to factory defaults without knowing the current password by using the hardware reset button. This action will restore all settings, including the Wi-Fi name (SSID) and password, to their original factory state, and you will need to reconfigure your network settings afterward.
Here are the step-by-step reset instructions:
- Locate the Reset Button: Find the small reset button on your Digisol DG-HR3400 router. It is typically located on the back or bottom of the device and may be recessed, requiring a paperclip or a similar pointed object to press.
- Power On the Router: Ensure the router is powered on and connected to a power source.
- Press and Hold: Using a paperclip, press and hold the reset button for approximately 10 seconds.
- Release the Button: Release the reset button. The router will reboot.
- Reconnect and Log In: Wait for the router to fully restart, then try logging in using the default IP address (192.168.2.1), default username (
admin), and default password (1234).
This process is crucial if you have forgotten your router login password and need to regain access to your router's settings.
Why Can't I Log In to My Digisol DG-HR3400 Router?
If you are unable to log in to your Digisol DG-HR3400 router, there are several common reasons for this issue. The most frequent causes include entering an incorrect IP address, using the wrong administrator credentials, or encountering browser-related problems. Ensure you are using the correct default IP address, 192.168.2.1, and the default username admin with the password 1234. If these do not work, it's possible the credentials were changed previously; in this case, performing a factory reset is recommended. Additionally, clearing your browser's cache and cookies can resolve login issues caused by outdated stored data. Verify that your device is connected to the router's network and that no firewall settings are blocking access to the router's admin page.
How Do I Secure My Digisol DG-HR3400 Router After Login?
Securing your Digisol DG-HR3400 router after logging in is essential for protecting your home network from unauthorized access and cyber threats. According to the manufacturer's recommendations and general security best practices, you should implement the following measures:
* Change the Default Password: Immediately after logging in, change the default administrator password (1234) to a strong, unique password. A strong password should include a mix of uppercase and lowercase letters, numbers, and symbols, and be at least 12 characters long.
* Enable WPA2/WPA3 Encryption: For your Wi-Fi network, ensure you are using WPA2-PSK (AES) or, if available and supported by your devices, WPA3 encryption. This provides the strongest protection for your wireless signal.
* Update Firmware: Regularly check for and install firmware updates from Digisol. Firmware updates often include security patches that protect against newly discovered vulnerabilities.
* Disable Remote Management: Unless you specifically need to manage your router from outside your home network, disable the remote management feature. This feature can be a security risk if not properly secured.
* Set Up a Guest Network: If your router supports it, create a guest Wi-Fi network for visitors. This keeps their devices isolated from your main network and your private files.
Other Default Credentials for Digisol Routers
| Username | Password | Notes |
|---|
| admin | admin | Most common default |
| admin | password | Some firmware versions |
| admin | (blank) | Older models |
| user | user | Guest access |
What Are Common Router Login IP Addresses?
| IP Address | Common Usage | Brands |
|---|
| 192.168.1.1 | Most common gateway | TP-Link, Netgear, Asus |
| 192.168.0.1 | Common alternative | D-Link, Belkin |
| 192.168.1.254 | ISP-provided routers | Various ISPs |
| 10.0.0.1 | Apple & some cable routers | Apple AirPort, Xfinity |
IP Address Probability Table
| Address / Domain | Usage Probability | Notes |
|---|
| 192.168.2.1 | 48% | Primary default for this model |
| 192.168.0.1 | 47% | Second most common |
| 192.168.0.254 | 3% | ISP configurations |
| 192.168.1.253 | 1% | Rare configurations |
| tplogin.cn | 1% | TP-Link specific domain |
Frequently Asked Questions About Digisol DG-HR3400 Login
- Q: What is the default username and password for the Digisol DG-HR3400 router?
- A: The default username for the Digisol DG-HR3400 router is admin, and the default password is 1234. These are the credentials typically used upon initial setup.
- Q: How do I log in to my Digisol DG-HR3400 router?
- A: To log in to your Digisol DG-HR3400 router, open a web browser, navigate to the IP address 192.168.2.1, and enter the default username 'admin' and password '1234'.
- Q: What should I do if I forgot my Digisol DG-HR3400 router password?
- A: If you forgot your Digisol DG-HR3400 router password, you can reset the router to its factory default settings by pressing and holding the reset button for about 10 seconds. This will restore the default login credentials (admin/1234).
- Q: How can I find the IP address of my Digisol DG-HR3400 router?
- A: The default IP address for the Digisol DG-HR3400 router is 192.168.2.1. You can also find this information on a sticker on the router itself or by checking your computer's default gateway settings.
- Q: Is it safe to use the default login credentials for my Digisol DG-HR3400 router?
- A: No, it is not safe to use the default login credentials for your Digisol DG-HR3400 router. For security reasons, you should always change the default username and password to something strong and unique immediately after logging in for the first time.
- Q: How do I reset my Digisol DG-HR3400 router to factory settings?
- A: To reset your Digisol DG-HR3400 router to factory settings, locate the reset button on the device, power it on, and then press and hold the button for approximately 10 seconds until the router restarts.
