- Default IP Address: 192.168.31.1
- Default Username: admin
- Default Password: admin
- Admin panel URL: http://192.168.31.1
- Reset method: Hold reset button for 10 seconds
- Supported browsers: Chrome, Firefox, Edge, Safari
- Connect to the Network: Ensure your device (computer or smartphone) is connected to the Xiaomi Mi WiFi Range Extender Pro's Wi-Fi network. If you are setting it up for the first time, it's recommended to connect via an Ethernet cable to your computer for a stable connection, though a wireless connection is also possible.
- Open a Web Browser: Launch your preferred web browser, such as Google Chrome, Mozilla Firefox, Microsoft Edge, or Safari.
- Enter the IP Address: In the address bar of your browser, type the default IP address for the Xiaomi Mi WiFi Range Extender Pro, which is 192.168.31.1, and press Enter.
- Enter Credentials: On the login page, you will be prompted to enter the username and password. The default username is admin, and the default password is also admin.
- Access the Admin Panel: Click the "Login" button. If the credentials are correct, you will be granted access to the router's administration interface, where you can manage its settings.
- Locate the Reset Button: Find the small reset button on the Xiaomi Mi WiFi Range Extender Pro. It is usually located on the side or back of the device and may require a pin or a paperclip to press.
- Power On the Device: Ensure the extender is plugged into a power outlet and turned on.
- Press and Hold: Using a pin or paperclip, press and hold the reset button for approximately 10-15 seconds. You should observe the LED indicator lights on the device changing or flashing, indicating that the reset process has begun.
- Release the Button: After holding the button for the specified time, release it. The device will reboot and restore its factory default settings.
- Reconnect and Reconfigure: Once the extender has fully rebooted, you can access its admin panel using the default IP address (192.168.31.1), username (admin), and password (admin). You will need to reconfigure your network settings, including the Wi-Fi name and password, as per your requirements.
- How do I log in to my Xiaomi Mi WiFi Range Extender Pro if I forgot the password?
- If you have forgotten the password for your Xiaomi Mi WiFi Range Extender Pro, you will need to perform a factory reset on the device. This process will revert all settings, including the password, to their original defaults. After the reset, you can log in using the default username 'admin' and the default password 'admin' by navigating to 192.168.31.1 in your web browser.
- What is the default IP address for the Xiaomi Mi WiFi Range Extender Pro?
- The default IP address for the Xiaomi Mi WiFi Range Extender Pro is 192.168.31.1. This address is used to access the device's administrative panel for configuration and management.
- Where can I find the default login credentials for my Xiaomi Mi WiFi Range Extender Pro?
- The default login credentials for the Xiaomi Mi WiFi Range Extender Pro are typically printed on a sticker located on the bottom or back of the device itself. The default username is 'admin' and the default password is 'admin'.
- Can I change the Wi-Fi password on my Xiaomi Mi WiFi Range Extender Pro?
- Yes, after logging into the admin panel of your Xiaomi Mi WiFi Range Extender Pro using the default credentials (192.168.31.1, admin/admin), you can navigate to the Wi-Fi settings to change the Wi-Fi network name (SSID) and password to your preferred settings.
- What should I do if I cannot access the login page for my Xiaomi Mi WiFi Range Extender Pro?
- If you cannot access the login page for your Xiaomi Mi WiFi Range Extender Pro, first ensure your device is connected to the extender's Wi-Fi network and that you are using the correct IP address (192.168.31.1). Try clearing your browser's cache, using a different browser, or performing a factory reset on the extender if the default credentials do not work.
- Is it safe to use the default password on my Xiaomi Mi WiFi Range Extender Pro?
- No, it is not safe to use the default password ('admin') on your Xiaomi Mi WiFi Range Extender Pro. For security reasons, you should always change the default password to a strong, unique password immediately after logging in for the first time to prevent unauthorized access to your network.
| Field | Value |
|---|---|
| Router Model | Mi WiFi Range Extender Pro |
| Brand | Xiaomi |
| Default IP Address | 192.168.31.1 |
| Login URL | http://192.168.31.1 |
| Default Username | admin |
| Default Password | admin |
| Wireless Standard | IEEE 802.11b/g/n |
| Frequency Bands | 2.4GHz |
Key Facts About Xiaomi Mi WiFi Range Extender Pro Default Login
The Xiaomi Mi WiFi Range Extender Pro is a popular device designed to amplify and extend your existing Wi-Fi network's reach, eliminating dead zones and ensuring a more stable connection throughout your home or office. To manage its settings, you'll need to access its admin panel using its default IP address, username, and password. This guide provides comprehensive instructions on how to log in, find your router's IP, and troubleshoot common issues.
What Are the Technical Specifications of the Xiaomi Mi WiFi Range Extender Pro?
| Specification | Details |
|---|---|
| Wireless Standard | IEEE 802.11b/g/n |
| Frequency Bands | 2.4GHz |
| Max Speed | Up to 300 Mbps |
| Wireless Security | WPA-PSK/ WPA2-PSK encryption |
| Antennas | 2 external antennas |
| Ethernet Ports | None (Plug-in type) |
| CPU | MT7628K 580 MHz |
| RAM | 8 MB |
| ROM | 2 MB |
| Power Supply | 100-240 V/0.35 A |
| Power Consumption | 3.57 W |
| Dimensions | 80 x 54 x 70 mm |
| Weight | 82 g |
According to the manufacturer's specifications, the Xiaomi Mi WiFi Range Extender Pro operates on the 2.4GHz frequency band, supporting the IEEE 802.11b/g/n wireless standards. It offers a transmission rate of up to 300 Mbps, making it suitable for everyday internet activities like browsing, streaming, and online gaming. The device features two external antennas to enhance signal strength and coverage. For security, it supports WPA-PSK/WPA2-PSK encryption. The extender is powered by a MediaTek MT7628K CPU running at 580 MHz, with 8 MB of RAM and 2 MB of ROM. Its compact, plug-in design eliminates the need for an external power adapter, drawing power directly from a wall outlet (100-240 V/0.35 A).
How Do I Log In to the Xiaomi Mi WiFi Range Extender Pro Router Admin Panel?
To access the Xiaomi Mi WiFi Range Extender Pro admin panel (router configuration interface), follow these steps:
It is highly recommended to change the default username and password after your initial login to enhance your network's security. If you encounter issues, ensure your device is connected to the extender's network and that you have entered the IP address and credentials correctly.
How Do I Find the Xiaomi Mi WiFi Range Extender Pro Login IP Address?
The default login IP address for the Xiaomi Mi WiFi Range Extender Pro is 192.168.31.1. This is the most common IP address used by Xiaomi routers to access their administrative interface. If you are connected to the extender's network, you can usually find this IP address printed on a sticker on the bottom or back of the device itself. Alternatively, you can determine your current IP address using your computer's command prompt or terminal.
On Windows, open the Command Prompt and type ipconfig. Look for the "Default Gateway" entry under your active network connection; this will display the IP address used to access your router. On macOS or Linux, open the Terminal and type ip route | grep default or netstat -nr | grep default. The output will show the default gateway IP address. If the default IP address of 192.168.31.1 does not work, you may need to reset the extender to its factory default settings or consult the device's manual for any specific IP address configurations.
How Do I Reset the Xiaomi Mi WiFi Range Extender Pro Router Password Without Logging In?
You can reset the Xiaomi Mi WiFi Range Extender Pro to factory defaults without knowing the current password by using the hardware reset button. This process will restore all settings, including the Wi-Fi name (SSID) and password, back to their original defaults.
Follow these steps to perform a factory reset:
Warning: Resetting the device will erase all custom configurations, including your Wi-Fi network name and password. This action is irreversible and will require you to set up the extender again from scratch.
Why Can't I Log In to My Xiaomi Mi WiFi Range Extender Pro Router?
There are several common reasons why you might be unable to log in to your Xiaomi Mi WiFi Range Extender Pro router.
The three most common causes are incorrect IP address, changed credentials, or a temporary network issue. Firstly, ensure you are using the correct default IP address, which is 192.168.31.1. If the IP address has been changed or you are unsure, try finding it using your device's network settings or by checking the sticker on the extender itself. Secondly, verify that you are entering the correct default username and password. If these were changed previously and forgotten, you will need to perform a factory reset. Thirdly, clear your browser's cache and cookies, or try accessing the admin panel using a different web browser or an incognito/private browsing window, as cached data can sometimes interfere with login processes. Additionally, ensure your device is properly connected to the extender's Wi-Fi network, and that no firewall or antivirus software is blocking access to the router's interface.
How Do I Secure My Xiaomi Mi WiFi Range Extender Pro Router After Login?
After successfully logging into your Xiaomi Mi WiFi Range Extender Pro, it is crucial to implement security measures to protect your network. Firstly, change the default administrator password from "admin" to a strong, unique password. This is the most critical step to prevent unauthorized access to your router's settings. For password strength, aim for a combination of upper and lowercase letters, numbers, and symbols, at least 12 characters long.
Secondly, ensure that WPA2 or WPA3 encryption is enabled for your Wi-Fi network. While the extender itself primarily supports WPA-PSK/WPA2-PSK, using the strongest available encryption protocol is vital. Thirdly, consider disabling remote management if it is enabled, as this prevents access to your router's settings from outside your local network. Fourthly, regularly check for and install firmware updates provided by Xiaomi. Firmware updates often include security patches that protect against known vulnerabilities. Finally, if your extender supports it, set up a guest network. A guest network allows visitors to access the internet without giving them access to your main network and its connected devices.
Other Common Default Credentials for Xiaomi Routers
| Username | Password | Notes |
|---|---|---|
| admin | admin | Most common default for Xiaomi routers |
| admin | password | Some firmware versions |
| admin | (blank) | Older models |
| user | user | Less common, but sometimes used |
What Are Common Router Login IP Addresses?
| IP Address | Common Usage | Brands |
|---|---|---|
| 192.168.1.1 | Most common gateway | TP-Link, Netgear, Asus |
| 192.168.0.1 | Common alternative | D-Link, Belkin |
| 192.168.1.254 | ISP-provided routers | Various ISPs |
| 10.0.0.1 | Apple & some cable routers | Apple AirPort, Xfinity |
| 192.168.31.1 | Common for Xiaomi | Xiaomi |
IP Address Probability Table
| Address / Domain | Usage Probability | Notes |
|---|---|---|
| 192.168.31.1 | 75% | Primary default for Xiaomi Mi WiFi Range Extender Pro |
| 192.168.0.1 | 10% | Common alternative for other brands |
| 192.168.1.1 | 10% | Most common router IP |
| 192.168.0.254 | 3% | ISP configurations |
| 192.168.1.253 | 1% | Rare configurations |
| tplogin.cn | 1% | TP-Link specific domain |